UK, IE, USA, CA, AU, NZ Curriculuminfo@mathiqalearning.commathiqalearning@gmail.com

SUVAT Equations: Solving Uniformly Accelerated Motion Problems With Worked Examples

SUVAT Equations: Solving Uniformly Accelerated Motion Problems With Worked Examples
Science Help3 min readUpdated 23 Oct 2026By the MathiQa tutor team
In this article
  1. What SUVAT stands for
  2. The five equations
  3. A 4-step method for uniformly accelerated motion problems
  4. Worked example 1: A car accelerating
  5. Worked example 2: Braking distance
  6. Worked example 3: Free fall
  7. Sign conventions (where most marks are lost)
  8. When you can’t use SUVAT

Whenever an object speeds up or slows down at a steady rate — a car braking, a sprinter accelerating, a ball dropped from a bridge — you can describe its motion with five equations known as SUVAT. They’re central to GCSE and A Level Physics, A Level Maths (Mechanics), Leaving Cert Physics and Applied Maths, and AP Physics 1. This guide shows how to solve uniformly accelerated motion problems step by step.

What SUVAT stands for

Letter Quantity Unit
s displacement m
u initial velocity m/s
v final velocity m/s
a acceleration m/s²
t time s

The five equations

v = u + atno s
s = ut + ½at²no v
s = vt − ½at²no u
v² = u² + 2asno t
s = ½(u + v)tno a
Each equation leaves out exactly one quantity. So the method is: list what you know, cross out the one you don’t know and don’t need, and pick the equation that leaves that one out.

A 4-step method for uniformly accelerated motion problems

  1. Write s, u, v, a, t down the side of your page.
  2. Fill in the three values you know. Write “?” next to the one you want.
  3. The fifth letter is the one you don’t need — choose the equation without it.
  4. Substitute, solve, add units.

Worked example 1: A car accelerating

EXAMPLE 1

A car starts from rest and accelerates at 3 m/s² for 8 s. How far does it travel?

  1. s = ?, u = 0, a = 3, t = 8 (v not needed)
  2. Use s = ut + ½at² = 0 + ½ × 3 × 64

s = 96 m

Worked example 2: Braking distance

EXAMPLE 2

A cyclist travelling at 15 m/s brakes and stops in 25 m. Find the deceleration.

  1. s = 25, u = 15, v = 0, a = ? (t not needed)
  2. v² = u² + 2as → 0 = 225 + 50a
  3. a = −225 ÷ 50

a = −4.5 m/s², a deceleration of 4.5 m/s²

Worked example 3: Free fall

EXAMPLE 3

A ball is thrown straight up at 14 m/s. How high does it go, and how long does it take to reach the top? (g = 9.8 m/s²)

  1. Taking up as positive: u = 14, v = 0 (at the top), a = −9.8
  2. Height: v² = u² + 2as → 0 = 196 − 19.6s → s = 10 m
  3. Time: v = u + at → 0 = 14 − 9.8t → t ≈ 1.43 s

Maximum height = 10 m; time to the top ≈ 1.43 s

Sign conventions (where most marks are lost)

Choose one direction as positive at the start and write it down. Anything in the opposite direction is negative — including g if you chose “up” as positive. A negative acceleration means slowing down only if the object is moving in the positive direction.

When you can’t use SUVAT

SUVAT only works when acceleration is constant. If acceleration changes (for example a falling skydiver with growing air resistance), you need graphs or calculus. Velocity-time graphs help here: the gradient is acceleration and the area under the graph is displacement.

Ready for two-dimensional motion? Try our projectile motion guide.

Frequently asked questions

How do I know which SUVAT equation to use?

Identify the one quantity that you neither know nor need, then use the equation that doesn’t contain it.

Do I need to memorise the SUVAT equations?

It depends on your exam board. Some provide them on a formula sheet; others (including GCSE Physics for some equations) expect you to recall them. Learning all five is the safest choice.

Is displacement the same as distance?

No. Displacement has a direction and can be negative; distance is just how far something travelled.

Keep reading

Leave a Comment

Your email address will not be published. Required fields are marked *

Shopping Cart
Scroll to Top